Pulsar Technologies, Inc.

     Home Page                                    >  
     Products                                         >  
     Customer Services                >  
     What's New                                  >  
     Request for Quotation          >  
     Feedback                                       >  
     Related Links                              >  
     FAQ                                                     >  
     Downloads                                   >  
     AMETEK                                   

 
 
 
 
   
MBT 9600


Four Wire Modem for Teleprotection Applications

The MBT9600 is a dedicated four wire modem designed for use with Schweitzer Engineering Laboratories Inc. protective relays which use "Mirrored Bits" Relay-to-Relay logic communications. These relays use 9600 bps asynchronous communications as an integral part of mirrored bit logic communications for protection, monitoring and control.

Application specific features set the MBT9600 apart from conventional high speed modems. Conventional modems typically have retrain times in excess of 15 seconds and absolute data delays in excess of 25 milliseconds. These critical parameters make conventional modems unusable for most relaying applications.

Its compact size and ease of installation make it an ideal low cost alternative to conventional audio tone teleprotection systems. The circuitry is ideally suited for use over private networks such as conventional voice channels over analog microwave.

The MBT9600 is also suitable for application in other voice frequency systems which require environmentally hardened, dedicated four wire modems. The MBT9600 meets or exceeds all applicable ANSI/IEEE and IEC standards.


Features and Benefits
  • Compact, mounts directly onto DB-9 connectors.
  • Serial port powered, no external power supplies.
  • Auto configuring.
  • Fast retrain times.
  • Low Absolute1 data delays.
  • No user set-up required.


  • Technical Specifications
    PERFORMANCE
    Data Rates:9600 bps
    Absolute delay1:<12ms @ 9600 bps
    Retrain Time:Typically < 1.4 Sec.
    Dimensions.75"(1.90cm) x 1.25"(3.18cm) x 3.2"(8.13cm) Projection mount
    Power Requirements+5 Vdc from pin 1 of the DB 9 connector < 125 milliamps
    AUDIO
    Impedance:600 Ohms
    Levels:Transmit -9 dBm
    Receive -9 to -30 dBm
    Audio Bandwidth:300 - 3400 Hz (4 wire circuit)
    Minimum SNR:27 dB @ 9600 bps
    Conditioning:C4 conditioning is required for leased circuits
    ENVIRONMENTAL
    Temperature Range:-40 to +85C
    EMI:IEEE C37.90.2 / IEC 1000-2-2
    Dielectric:ANSI C37.90 & C37.90.1 / IEC 1000-4-4 & IEC 255-22-1
    ESD:IEC 1000-4-2

    1 Absolute delay is the time a bit enters the modem to the time it exits the adjacent modem. This time is exclusive of any communications system propagation delays.



    Copyright © 1998-2010 Pulsar Technologies Inc. All Rights Reserved.

    This site developed and maintained by
    Sovereign Web Solutions, Inc.